| MODEL |
DY-860G |
DY-1000G |
DY-1100G |
| SWING |
Distance Between Centers |
1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 mm |
| Swing Over Bed |
860 mm |
1000 mm |
1100 mm |
| Swing Over Cross Slide |
550 mm |
690 mm |
790 mm |
| Swing Over Gap |
1210 x 530 |
1350 x 530 |
1450 x 530 |
| Height of Center (Over Bed) |
430 mm |
500 mm |
550 mm |
| BED |
Width |
558 mm |
| HEADSTOCK |
Spindle Nose |
A2-11/A2-15/A2-20/A2-20 |
| Spindle Bore |
153mm / 230mm(Opt.) / 310mm(Opt.) / 360(Opt.) |
| Spindle Speed (rpm) |
9~600rpm / 12~400rpm / 10~350rpm / 10~350rpm |
| Number of Spindle Speed |
12 steps / 12 steps / 12 steps / 12 steps |
| FEEDS - THREAD |
Leadscrew |
Ø50.8 mm. 2T.P.I. or 12 pitch |
| Number of Feed Changes |
40 |
| Longitudinal Feed Range |
0.10 ~ 2.88 mm/rev |
| Cross Feed Range |
0.05 ~ 1.44 mm/rev |
| Inch Threads |
29 Kinds, 1 ~ 28 T.P.I |
| Metric Threads |
26 Kinds, 1.25 ~ 28 mm |
| TOOL SLIDE |
Cross Slide Travel |
505 mm |
| Compound Rest Travel |
250 mm |
| TAILSTOCK |
Quill Travel |
300 mm |
| Quill Diameter |
115 mm / 160 mm (OPT.) |
| Taper of Center |
MT#6 |
| MOTOR |
Main Motor |
30 HP x 4P / 40 HP x 4P (OPT.) |
| Rapid Feed Motor |
1/2 HP |
| Coolant Pump |
1/2 HP |
| Length (mm) |
2700 / 3200 / 3700 / 4700 / 5700 / 6700 / 7700 / 8700 / 9700 / 10700 / 11700 / 12700 / 13700 / 14700 / 15700 / 16700 / 17700 |
| Width (mm) |
2000 |
| Height (mm) |
1820 |
1920 |
2020 |
| N.W (kg) |
5900 / 6600 / 7300 / 8700 / 10100 / 11500 / 12900 / 14300 / 15700 / 17100 / 18500 / 19900 / 21300 / 22700 / 24100 / 25500 / 26900 |
