| MODEL |
ATC-1100 |
ATC-1200 |
ATC-1300 |
| Machining Capability |
Distance Between Centers |
2000/ 3000/ 4000/ 5000/ 6000/ 7000/ 8000/ 9000/ 10000mm |
| Swing Over Bed |
1100 mm |
1200 mm |
1300 mm |
| Swing Over Gap |
1400x600 |
1500x600 |
1600x600 |
| Main Spindle |
Spindle Nose |
A2-15, 230mm : L 20~110, M 110~320, H 320~660rpm
A2-20, 310mm : L 20~100, M 100~200, H 200~400rpm
A2-28, 410mm : L 20~80, M 80~150, H 150-250rpm |
| Spindle Bore |
| Spindle Speed (rpm) |
| |
| Travel |
X Axis |
620mm |
| Y Axis (Optional) |
+ 250mm |
+ 250mm |
+ 200mm |
| Z Axis |
2080/3080/ 4080/ 5080/ 6080/ 7080/ 8080/ 9080/ 10080mm |
| Feeds |
X Axis Rapid Traverse |
15M/min |
| Y Axis Rapid Traverse (Optional) |
6M/min |
| Z Axis Rapid Traverse |
15M/min |
| Cutting Feed Rate |
0.001-500mm/rev (0.0004"-20"/rev) |
| Motors |
Main Motor |
Spindle Motor 37kw |
| X Axis Servo Motor |
AC Servo Motor 7.0kw, 30Nm |
| Y Axis Servo Motor (Opt) |
AC Servo Motor 6.0kw, 38Nm, ABS |
| Z Axis Servo Motor |
AC Servo Motor 6.0kw, 38Nm |
| Lubrication Pump |
100W |
| Coolant Pump |
450W, 6~10 bar |
| Hydraulic Tank Pump (Optional) |
5hp (3.7kw) |
| Tank Capacity |
Hydraulic Tank (Optional) |
70L |
| Lubrication Pump |
2 L |
| Coolant Tank |
100L |
| Ball Screw |
X Axis Diameter |
40mm / pitch 10 |
| Y Axis Diameter |
40mm / pitch 10 |
| Z Axis Diameter |
63mm / pitch 10 |
| Tailstock |
Quill Diameter |
160mm / A2-8 250mm (opt) |
| Quill Travel |
200mm |
| Quill Taper |
MT6 |
| Length |
5340/6340/7340/8340/9340/10340/1340/12340/13340mm |
| Height |
3000mm |
| Width |
3000mm |
| N.W (kg) |
20000/22000/ 25000/ 28000/ 31000/ 34000/ 37000/ 40000/ 43000 |
| * Above specifications are subject to change without notice. Special requirement please connect with us. |
