| ITEM |
MODEL |
AF-1600 |
AF-1800 |
AF-2000 |
| Machining capability |
Swing over bed |
1600mm |
1800mm |
2000mm |
| Swing over cross slide |
900mm |
1100mm |
1300mm |
| BED |
Width |
1400mm |
| Main Spindle |
Spindle nose |
A2-15 |
| Spindle bore |
230mm |
| Spindle speed (rpm) |
L:10~50, M: 50~150, H: 150~400rpm |
| Travel |
Cross travel (X axis) |
900mm |
920mm |
1020mm |
| Longitudinal travel (Z axis) |
1500mm |
| Feeds |
X axis rapid traverse |
5M/min |
| Z axis rapid traverse |
5M/min |
| Cutting feed rate |
0.001-500mm/rev (0.0004"-20"/rev) |
| Motors |
Main motor |
spindle motor 1PH8165-1DF00, 37kw |
| Inverter |
-------- |
| X axis servo motor |
1FK7101, 4.3kw, 27Nm |
| Z axis servo motor |
1FT7105, 11.7kw, 65Nm |
| Oil pump |
30W / 8L |
| Coolant pump |
750W, 6~10bar |
| Hydraulic tank pump (optional) |
3hp (2.2kw) |
| Tank Capacity |
Hydraulic tank (optional) |
20L |
| Lubrication pump |
8L |
| Ball Screw |
X axis diameter |
50mm / Pitch 10 |
| Z axis diameter |
80mm / Pitch 10 |
| Tailstock |
Quill diameter |
--- |
| Quill travel |
--- |
| Quill taper |
--- |
| Length (mm) |
4950mm (with chip conveyor: 6610mm) |
| Width (mm) |
3100mm |
| Height (mm) |
2750mm |
| N.W (kg) |
14600kgs |
