Name: Conventional Manual Lathe DY-410GB~510G (BED 330MM)
Brand: Annn Yang

MODEL		DY-410GB	DY-410G	DY-460G	DY-510G
Swing	Distance between centers	1000 / 1500	1100 / 1600 / 2100 / 3100 mm
	Swing over bed	410mm	410mm	460mm	510mm
	Swing over cross slide	230mm	230mm	270mm	320mm
	Swing over gap	660mm	660mm	710mm	760mm
	Height of center (over bed)	205mm	205mm	230mm	255mm
Bed	Bed Width	305mm	330mm
Headstock	Spindle nose Spindle bore	D1-6 54mm	D1-6 63mm	D1-6: 63mm D1-8: 80mm / 102mm(Opt.)
	Spindle speed (rpm)	75~2000rpm	D1-6: 36~2000 rpm / D1-8: 36~1500rpm
	Number of spindle speed	8 Change	12 Change
Feeds- Thread	Leadscrew	Ø35 mm. 4T.P.I. or 6 pitch
	Number of feed changes	32
	Longitudinal feed range	0.04~1.0 mm/rev
	Cross feed range	With rapid traverse: 0.02~0.5mm/rev Without rapid traverse: 0.04~1.0mm/rev
	Inch threads	37 Kinds 2~56 T.P.I.
	Metric threads	41 Kinds P0.2~14
	D.P. No. / range	19 Kinds D.P 8~44
	Module pitches No. / range	18 Kinds M 0.3~3.5
Tool slide	Cross slide travel	240mm	260 mm
Tool slide	Compound rest travel	95mm	127 mm
Tailstock	Quill travel	120mm	130mm
	Quill diameter	65mm		75mm
	Taper of center	MT4		MT5
Motor	Main motor	5HP	7.5HP / 10HP(OPT)
Motor	Coolant pump	1/8HP	1/8HP

* Above specifications are subject to change without notice. Special requirement please connect with us.
Workpiece Weight Capacity	Chuck only	Chuck + tailstock	Chuck + 1 steady rest + tailstock	Chuck + 2 steady + tailstock
Spindle bore 54 mm	80 kg	300 kg	450 kg	700 kg
Spindle bore 63mm~80mm	300 kg	800 kg	1000 kg	1500 kg
Spindle bore 102mm	400 kg	900 kg	1100 kg	1600 kg