Clutch Lathe DY-460M~510M (BED 330MM)

  • Specification
  • Photos
  • Download
MODEL DY-460M DY-510M
SWING Distance Between Centers 1100 / 1600 / 2100 / 3100 mm
Swing Over Bed 460 mm 510 mm
Swing Over Cross Slide 270 mm 320 mm
Swing Over Gap 710 mm 760 mm
Height of Center (Over Bed) 230 mm 255 mm
BED Width 330 mm
HEADSTOCK

Spindle Nose

Spindle Bore

D1-8:80 mm / 102 mm (Opt. for 510m)
Spindle Speed (rpm) 36 ~ 1500rpm
Number of Spindle Speed 12 Change
FEEDS - THREAD Leadscrew Ø35 mm. 4T.P.I. or 6 pitch
Number of Feed Changes 32
Longitudinal Feed Range 0.04 ~ 1.0 mm/rev
Cross Feed Range

With rapid traverse: 0.02-0.5 mm/rev;

Without rapid traverse: 0.04~1.0 mm/rev

Inch Threads 37 Kinds, 2 ~ 56 T.P.I
Metric Threads 41 Kinds, P0.2 ~ 14
D.P No. / Range 19 Kinds D.P 8 ~ 44
Module Pitches No. / Range 18 Kinds M 0.3 ~ 3.5
TOOL SLIDE Cross Slide Travel 260 mm
Compound Rest Travel 127 mm
TAILSTOCK Quill Travel 130 mm
Quill Diameter 75 mm
Taper of Center MT#5
Motor Main Motor 10 HP / 12.5 HP (Opt.)
Coolant Pump 1/8 HP
Packing Size L x W x H (mm) 1100 mm 1600 mm 2100 mm 3100 mm
DY-460M 2370 x 1100 x 1750 2880 x 1100 x 1750 3400 x 1100 x 1750 4410 x 1100 x 1750
DY-510M 2370 x 1100 x 1800 2880 x 1100 x 1800 3400 x 1100 x 1800 4410 x 1100 x 1800
WEIGHT (Approx.) N. W / G. W 2000, 2150 kg 2300, 2450 kg 2800, 3000 kg 3600, 3850 kg

Workpiece
Weight Capacity
Chuck only Chuck + Tailstock Chuck + 1 Steady rest + Tailstock Chuck + 2 Steady rest + Tailstock
Spindle bore 80mm 300kg 800kg 1000kg 1500kg
Spindle bore102mm(Op. for 510M) 400kg 900kg 1100kg 1600kg
* Above specifications are subject to change without notice. Special requirement please connect with us.
DY-460M~510M (BED 330MM)
  • DY-460M_510M.pdf