Variable Speed Lathe DY-1100VS~1500VS (BED 692MM)

  • Specification
  • Photos
  • Download
MODEL DY-1100VS DY-1200VS DY-1300VS DY-1400VS DY-1500VS
SWING Distance Between Centers 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 / 17000 / 18000 / 19000 / 20000 / 21000 / 22000 / 23000 / 24000 / 25000 MM
Height of Center (Over Bed) 550 mm 600 mm 650 mm 700 mm 750 mm
Swing Over Bed 1100 mm 1200 mm 1300 mm 1400 mm 1500 mm
Swing Over Cross Slide 730 mm 830 mm 930 mm 1030 mm 1130 mm
Swing Over Gap 1600 x 750 1700 x 750 1800 x 750 1900 x 750 2000 x 750
BED Width 692 mm
HEADSTOCK Spindle Nose A2-11 ISO A2-15 ISO A2-20 ISO A2-20 ISO A2-28 ISO
Spindle Bore 165 mm 230 mm 305 mm 360 mm 410 mm
Spindle Speed (rpm)

L: 20 ~ 110rpm,

M: 110 ~ 320rpm,

H: 320 ~ 660rpm

L: 20 ~ 110rpm,

M: 110 ~ 320rpm,

H: 320 ~ 660rpm

L: 20 ~ 110rpm,

M: 110 ~ 200rpm,

H: 200 ~ 400rpm

L: 20 ~ 100rpm,

M: 100 ~ 200rpm,

H: 200 ~ 300rpm

L: 20 ~ 100rpm,

M: 100 ~ 200rpm,

H: 200 ~ 250rpm

Number of Spindle Speed
FEEDS - THREAD Leadscrew Ø58 mm. 2T.P.I. or 12 pitch
Longitudinal Feed Range 0.0100 ~ 1.4145 mm/rev
Cross Feed Range 0.0102 ~ 0.5735 mm/rev
Inch Threads 35 Kinds, 1 ~ 59 T.P.I
Metric Threads 34 Kinds, 0.5 ~ 18mm
TOOL SLIDE Cross Slide Travel 750 mm
Compound rest travel 350 mm
TAILSTOCK Quill Travel 350 mm
Quill Diameter 125 mm / 180 mm (Opt.)
Taper of Center MT#6
MOTOR Main Motor 40HP(Sta)/ 50 HP(Opt)
Rapid Feed Motor 1/2 HP
Coolant Pump 1/2 HP
Length (mm) 4000 / 4500 / 5500 / 6500 / 7500 / 8500 / 9500 / 10500 / 11500 / 12500 / 13500 / 14500 / 15500 / 16500 / 17500 / 18500 / 19500 / 20500 / 21500 / 22500 / 23500 / 24500 / 25500 / 26500 / 27500
Width (mm) 2100mm
Height (mm) 1900 2000 2100 2200 2300
N.W (kg) 8750 / 9500 / 11000 / 12500 / 14000 / 15500 / 17000 / 18500 / 20000 / 21500 / 23000 / 24500 / 26000 / 27500 / 29000 / 30500 / 32000 / 33500 / 35000 / 36500 / 38000 / 39500 / 41000 / 42500 / 44000

Workpiece Weight capacity Chuck only Chuck + Tailstock Chuck + 1 Steady rest + Tailstock Chuck + 2 Steady rest + Tailstock
Spindle bore 165mm 1500kg 5000kg 8000kg 12000kg
Spindle bore 230-410mm 1900kg 5400kg 8400kg 12400kg
* Above specifications are subject to change without notice. Special requirement please connect with us.
DY-1100VS~1500VS (BED 692MM) DY-1100VS~1500VS (BED 692MM)
  • DY-1100VS_1500VS6dc5.pdf