Variable Speed Lathe DY-860VS~1100VS (BED 558MM)

  • Specification
  • Photos
  • Download
MODEL DY-860VS DY-1000VS DY-1100VS
SWING Distance Between Centers 1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 mm
Height of Center (Over Bed) 430 mm 500 mm 550 mm
Swing Over Bed 860 mm 1000 mm 1100 mm
Swing Over Cross Slide 550 mm 690 mm 790 mm
Swing Over Gap 1210 x 530 1350 x 560 1450 x 530
BED Width 558 mm
HEADSTOCK Spindle Nose

A2-11 ISO, 165mm, L: 20-110, M: 110-320, H: 320-660

A2-15 ISO, 230mm, L: 20-110, M: 110-320, H: 320-660

A2-20 ISO, 305mm, L: 20-100, M: 100-200, H: 200-400

A2-20 ISO, 360mm, L: 20-100, M: 100-200, H: 200-300

Spindle Bore
Spindle Speed (rpm)
Number of Spindle Speed

Variable speed

FEEDS - THREAD Leadscrew Ø50.8 mm. 2T.P.I. or 12 pitch
Number of Feed Changes 40
Longitudinal Feed Range 0.10 ~ 2.88 mm/rev
Cross Feed Range 0.05 ~ 1.44 mm/rev
Inch Threads

29 kinds, 1~28 T.P.I.

Metric threads

26 kinds, 1.25~28mm

TOOL SLIDE Cross Slide Travel 505 mm
Compound Rest Travel 250 mm
TAILSTOCK Quill Travel 300 mm
Quill Diameter 115 mm / 160 mm (Opt.)
Taper of Center MT#6
MOTOR Main Motor 30 HP / 4P(Sta), 40 HP / 4P (Opt.)
Rapid Feed Motor 1/2 HP
Coolant Pump 1/2 HP
Length (mm) 2700 / 3200 / 3700 / 4700 / 5700 / 6700 / 7700 / 8700 / 9700 / 10700 / 11700 / 12700 / 13700 / 14700 / 15700 / 16700 / 17700mm
Width (mm) 2000mm
Height (mm) 1820 1920 2020
N.W (kg) 5900 / 6600 / 7300 / 8700 / 10100 / 11500 / 12900 / 14300 / 15700 / 17100 / 18500 / 19900 / 21300 / 22700 / 24100 / 25500 / 26900

Workpiece Weight Capacity Chuck only Chuck + Tailstock Chuck + 1 Steady rest + Tailstock Chuck + 2 Steady rest + Tailstock
Spindle bore 165mm 1000kg 3000kg 5000kg 6000kg
Spindle bore 230-360mm 1400kg 3400kg 5400kg 6400kg
* Above specifications are subject to change without notice. Special requirement please connect with us.
DY-860VS~1100VS (BED 558MM)
  • DY-860VS_1100VS.pdf