Variable Speed Lathe DY-410VS~510VS (BED305/330MM)

  • Specification
  • Photos
  • Video
  • Download
MODEL DY-410VS DY-510VS
SWING Distance Between Centers 1000 / 1500 mm 1100 / 1600 / 2100 / 3100 mm
Swing Over Bed 410 mm 510 mm
Swing Over Cross Slide 230 mm 320 mm
Swing Over Gap 640 mm 760 mm
Height of Center (Over Bed) 205 mm 255 mm
BED Width 305 mm 330 mm
HEADSTOCK Spindle Nose & Bore D1-6 54 mm D1-8, 80 mm 102mm (Opt)
Spindle Speed (rpm) L: 25 ~ 350
M: 70 ~ 1000
H: 180 ~ 2700
L:60 ~ 230
M: 170 ~ 680
H: 550 ~2000
L: 50 ~ 220
M: 120 ~ 650
H: 220 ~ 1800
FEEDS - THREAD Leadscrew Ø35 mm. 4T.P.I. or 6 pitch
Number of Feed Changes 32
Longitudinal Feed Range 0.04 ~ 1.0 mm/rev
Cross Feed Range

with rapid traverse: 0.02-0.5 mm/rev ;

without rapid traverse: 0.04-1.0 mm/rev

Inch Threads 37 Kinds, 2 ~ 56 T.P.I
Metric Threads 41 Kinds, P0.2 ~ 14
D.P. No. / range 19 Kinds D.P 8 ~ 44
Module Pitches No. / Range 18 Kinds M 0.3 ~ 3.5
TOOL SLIDE Cross Slide Travel 240 mm 260 mm
Compound Rest Travel 95 mm 127 mm
TAILSTOCK Quill Travel 120 mm 130 mm
Quill Diameter 65 mm 75 mm
Taper of Center MT#4 MT#5
MOTOR Main Motor 7.5 hp / 10 hp (Opt) 10 hp / 12.5 hp (Opt)
Coolant Pump 1/8 hp
Length (mm) 2400 / 2900mm 2470 / 2970 / 3470/3970mm
Width (mm) 1100 1100
Height (mm) 1800 1880
N.W (kg) 1700 / 2000Kgs /2000 / 2300 / 2800 / 3600Kgs

Workpiece Weight Capacity Chuck only Chuck + Tailstock Chuck + 1 Steady rest + Tailstock Chuck + 2 Steady rest + Tailstock
Spindle bore 54mm 80kg 300kg 450kg 700kg
Spindle bore 80-102mm 300kg 800kg 1000kg 1500kg
* Above specifications are subject to change without notice. Special requirement please connect with us.
DY-410VS~510VS (BED305/330MM)
  • DY-410VS_510VS6dc5.pdf