| MODEL |
DY-660C |
DY-760C |
| Machining Capability |
Distance Between Centers |
1000 / 1500/ 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 |
| Swing Over Bed |
660 mm |
760 mm |
| Swing Over Cross Slide |
310 mm |
410 mm |
| BED |
Width |
558 mm |
| Main Spindle |
Spindle Nose |
D1-11, 130 mm, L: 40-130, M: 130-400, H: 400-1200
A2-11, 165 mm, L: 20-110, M: 110-320, H: 320-660
A2-15, 230 mm, L: 16-61, M: 50-190, H: 150-570 |
| Spindle Bore |
| Spindle Speed (rpm) |
| Spindle Taper |
MT15 |
| Travel |
Cross Travel (X Axis) |
330 mm |
380 mm |
| Standard tool post 240 x 240mm, larger tool post might cause travel reduced. |
| Longitudinal Travel (Z Axis) |
DBC-350 |
| Feeds |
X Axis Rapid Traverse |
5 M/min |
| Z Axis Rapid Traverse |
5 M/min |
| Cutting Feed Rate |
0.001 - 500 mm/rev (0.0004" - 20"/rev) |
| Motors |
Main Motor |
30 hp |
30 hp |
40 hp |
40 hp |
40 hp |
| Inverter |
30 hp |
30 hp |
40 hp |
40 hp |
40 hp |
| X Axis Servo Motor |
Siemens or Fanuc or Fagor AC servo motor FXM53, 11.9 Nm, 2.49 kw, 2000 rpm |
| Z Axis Servo Motor |
Siemens or Fanuc or Fagor AC servo motor FXM76, 39.7 Nm, 8.31 kw, 2000 rpm |
| Oil Pump |
100 W |
| Coolant Pump |
450 W, 6 ~ 10 bar |
| Hydraulic Tank Pump (Optional) |
3 hp (2.2 kw) |
| Tank Capacity |
Hydraulic Tank (Optional) |
20 L |
| Lubrication Pump |
8 L |
| Ball Screw |
X Axis Diameter |
40 mm |
| Z Axis Diameter |
1000 ~ 6000: 63 mm, 7000 ~ 10000: 80 mm, 10000 ~ 160000: Gear Rack |
| Tailstock |
Quill Diameter |
115 mm / 160 mm (OPT.) |
| Quill Travel |
300 mm |
| Quill Taper |
MT6 |
| Length (mm) |
4080 / 4580 / 5080 / 6080 / 7080 / 8080 / 9080 / 10080 / 11080 / 12080 / 13080 / 14080 / 15080 / 16080 / 17080 / 18080 / 19080 |
| Width (mm) |
2710 |
| Height (mm) |
2330 |
| N.W (kg) |
7700 / 8400 / 9100 / 10500 / 11900 / 13300 / 14700 / 16100 / 17500 / 18900 / 20300 / 21700 / 23100 / 24500 / 25900 / 27300 / 28700 |
| * Above specifications are subject to change without notice. Special requirement please connect with us. |
